Crystal clear epoxy casting resin. Suitable for most crafts and hobby projects such as jewelry casting, river tables, canvas painting and coins casting purposes etc. It comes in two parts - resin & hardener. These two parts must be mixed in precise ratio and mixed well to get best results. Crystal clear, high gloss and transparent, yellow resistant.Low set-to-touch and cure time. Goes well with pigments of all colors. Non toxic, low odor and low voc. Ratio a to b: 2.7 to 1 (by volume) or 3 to 1 (by weight).
Coverage: 1 thickness for 1 sq ft area needs about 2.5 l of epoxy (part a + b). Set to touch time: 12-14 hrs. Curing time: 20 - 24 hrs (varies based on ambient temp / humidity / thickness). Surface ready to use time: 72 hrs.Step 1: wear safety glasses and gloves. Measure 2.7 parts of part a and 1 part of part b by volume (or 3 to 1 by weight). Step 2: on porous objects such as made out of wood, paint a seal coat of same epoxy mixture of a & b first to seal any pores to prevent air bubbles from forming. Step 3: make sure the surface area is horizontal to the ground and leveled. Pour the epoxy on the surface all the way through the area. This epoxy self levels itself so no need to move it around with any tools. Let the epoxy fall over the edges and coat the vertical edges. The liquid epoxy that falls over the edges will form bumps and there is no need to worry about that. These can be sanded off once the epoxy is dried and cured. Step 4: if multiple flood coats are to be applied, make sure that each flood coat is less than 1/2 thick and maintain a gap of 4 hours between each flood coat. Step 5: pop air bubbles using a heat gun or plumber torch. Step 6: leave the surface for epoxy curing. This item is made of epoxy and resin.