Resin

ARC DEEP POUR Clear Casting Epoxy Resin

ARC DEEP POUR Clear Casting Epoxy Resin
ARC DEEP POUR Clear Casting Epoxy Resin
ARC DEEP POUR Clear Casting Epoxy Resin
ARC DEEP POUR Clear Casting Epoxy Resin
ARC DEEP POUR Clear Casting Epoxy Resin
ARC DEEP POUR Clear Casting Epoxy Resin
ARC DEEP POUR Clear Casting Epoxy Resin

ARC DEEP POUR Clear Casting Epoxy Resin

Arc clear casting deep pour resin kt 3 kg. Arc deep pour crystal clear casting super gloss resin kit. Arc deep pour resin kit 2:1 mix ratio(volume) is high quality ultra clear casting resin for multi purpose high thickness application in furniture , table covering, with low exothermic heat and extra uv that resists yellowing. Ultra crystal clear resin and hardener. Eco friendly resin kit non toxic and non solvent.

Excellent color stability- non yellowing stability in years. Perfect surface flatness and wonderful strength. It can be casted middle-high thickness and cures to glass-water like with allowed bubbles easily escape. You must mx resn and hardener in a clean dry container (preferentially choose the large container to width because wth this detail you can extend the pot-lfe time so you can won to much work time). Measure 2 parts a volume (resin) and 1 part b volume (hardener). Mix 3-8 minutes (ts changable to users) and you must sure to mx homogeneous. Transfer to second large container allow to rest for any bubbles to rise the top and escape. Generaly we dont suggest a heat gun for bubbles because there is a small but mportant rules n physics, f you gve hot to air, vol├╝me of ar is increase whch you gve hot so they can be seed so please choose your casting covering area 60f-65f and then our resin system allow the bubbles easily escape in first one hour. How much inche can you cast for all pour. This is very important topic for quality clear casting. T is depending on many factors like shop or workplace temperature , resn and hardener start of workng temperature , mixing quantity , mould and product design, resin area etc. The main strategy is that if you cast in cold area you can apply thick , f your area s hot , you must decrease the thickness and you must know the epoxy character whch brand you use. For arc deep pour resin kit , you can cast or covering avarage 2' (inch) maxmum per pour. (n the room tempareture means 60f-75f and for 1.5 gallon kt mx volume) (this is our main difference whch you can not find in any brand).

Pot-life-working time and curing time. Epoxy is a mass and temperature sensitive material.

The gel time (time it takes the mixed epoxy resin and hardener to initially harden up) can vary drastically depending on any number of factors such as mixing mass, material temp, ambient temp, mixing time, speed of mixing, speed of application, casting and coating thickness, etc. Arc deep pour has a 4-6 hour gel time at 80f in a 0 - 1 gallon kt , but will set up much faster if warmer or left sitting for an extended time in a larger mass. The more you mix up, and the warmer it is, the faster it will gel. That being said, 10-15 minutes is all it should take to carefully mix and pour. If the mixed epoxy starts to heat up in your mixing bucket, apply immediately. Keep in mind that epoxy is mass and temperature sensitive. Thin castings and cooler working conditions will cure slower, and thick castings and hotter working conditions will cure faster.
ARC DEEP POUR Clear Casting Epoxy Resin