Clear Epoxy Resin by Extreme Resin Industrial Grade Perfect for Crafts, Art, and Table Coatings
"Worked great, i used it on my boat platform". You get: one gallon combined of our general use epoxy resin tough enough for industrial grade applications but easy to use for anyone. The resin weighs 4.2 pounds and the hardener weighs 4 pounds.
Formulated to meet a variety of applications. Specially designed with low viscosity, convenient 1:1 mix ratio by volume, long pot life, room temperature curing system with great clarity and a high gloss finish. This product cures very hard and exhibits good air release. Excellent chemical and water resistance(s), coupled with superb mechanical properties, make this resin a candidate for all applications. Perfect for tabletops, fiberglass work, small castings (under 1/2 inch), electrical potting, jewelry making, concrete - pebble coating, marine applications- boat building, & wood water proofing - repairs.
Over 79% of craftsman and artisans prefer 1:1 extreme resin it has a crystal clear coating that mixes great with any color. Trusted to get the perfect finish every time with our 1 gallon kit, you'll get both epoxy resin and a curing agent that goes on smooth and dries evenly to eliminate crawling. This product worked extremely well for making both countertops and shower walls. I'm ordering 2 more gallons of it for another project. This cures fast: this product provides fast cure and property development at ambient and low temperatures without accelerators and allows for quick return to service.Typical pot-life on this item is roughly 45-50 minutes based on mass and temperature. Thin film set time 3mil. Film is roughly 5 hours at 78f. Fast cure and green time while exhibiting low exothermic temperatures 120c. Makes this product ideal for all applications.
Full cure is 24 hours at normal conditions. This product cures to a brilliant high gloss finish.
The finished product will be very rigid, smooth, clear, and display a brilliant high gloss finish similar to glass. Mixing this resin: this resin 1:1 by volume. When mixing this product, make sure to use a round cup & mix thoroughly scraping all sides and bottom of mixing container. Improperly mixed epoxy can create a major headache. Remember that thermoset plastics are temperature sensitive. Cold weather slows the cure process down, whereas heat speeds curing up. Always try to mix chemicals at room temperature.For best results, try pouring epoxy into hardener. Pour along the side of the container to help alleviate air entrapment. Mix for at least 3-5 minutes in a in a round motion until chemical are clear and free of striations. Allow the mixed components to stand in your mixed cup for at least 5 minutes.
This allows for bubbles to rise to the surface. Small castings and potting units may take longer to cure than larger items. Gg - extreme resin customer. Final result turned out great. I bought this for my daughter, she is starting a home based business and we were looking for good quality, less expensive resin mix. What we got was less expensive way better quality than she had tried from other manufactures. I spoke with the owner personally, she was friendly and very helpful, showed true interested in what we were doing we have since bought more and will again in the future. Storage: this chemical needs to be stored in a dry, safe, temperature controlled environment.Always keep the lids tightly sealed when not in use. Remember, oxygen and moisture oxidize and can rapidly degrade the epoxy and hardener.
Moisture is also a potential issue. Always keep the bottles sealed when not in use. Protection: when applying this product, use gloves, goggles, and proper safety equipment. Mix ratio: 1:1 by volume.
Pot-life: 45-50 minutes (100gram mass). Tensile strength, psi: 7,500. Compressive strength, psi: 15,400. Dielectric constant, 1mhz: 3.2. Product weight: 8 pounds combined.