Packaged as a set of a and b components. It is used in a ratio of 2:1 by weight.
It can be removed from the mold after 18-24 hours. Mix two products packaged as components a and b with each other. Make the mixture with a balance and while mixing, pour the "a" component into the "b" component and mix at low speed until a homogeneous and smooth image is obtained. Pour the prepared mixture into the mold to be applied and wait for it to dry.Epoxy resin is two-component and cannot be used without mixing the components. Never heat the product during mixing and application.
Always use precision balances when mixing products. For whatever reason, do not mix other materials that do not fit the system into the product.
Make sure that the equipment you use during the application is dry and clean. Low temperature may cause delayed drying and high temperature may cause premature drying. Do not move the system until you are sure that the spilled product has completely hardened. Otherwise, it may cause corrugation on the surface. Do not keep the products open.
This item is made of epoxy and resin, box.