Deep Pour Epoxy Resin Glass Clear, Deep Cast Resin. Fast Cure, Bubble Free Durable UV resistant Apex Resin
Apex resin deep cast - glass clear, deep pour resin. Bubble free, uv resistant epoxy resin for river tables, woodturning, flower preservation and more. Why choose apex resin deep cast. Our apex resins are at the top of their game for resin art, we didn't call them apex for nothing.
Apex resin deep cast is a crystal clear, high gloss epoxy resin specifically designed for deeper pours and castings. Thanks to it's advanced anti-yellowing technology, low heat generation and bubble free formula.It is perfect for river tables, wood turning, flower or keepsake preservation, jewellery, encapsulations and all other casting or deep pour applications you can think of with a high heat resistance up to 120c, pouring thickness of up to 30cm, long working time and fast cure time, it makes pouring deeper castings a breeze leaving a water clear, non scratch, uv resistant, durable finish. 3 litre kit (2000ml resin and 1000ml hardener) with instruction leaflet. 6 litre kit (4000ml resin and 2000ml hardener) with instruction leaflet. Easy 2 : 1 mixing ratio by volume. Heat resistant up to 120c / 248f.
Demould 16 - 24 hours (based on constant room temperature of 25c and pour depth of 15cm) cure time of pours below 15cm approx 24 - 48 hours. Cure times can vary based on pour depth and room temperature. Can be sanded after 3 - 5 days. Very low viscosity (mixed 1000 - 1500 centipoise).
Working time 60 - 90 minutes at 25c. Can be poured up to 30cm. The most durable resin on the market so you can be confident your artwork will stand the test of time and resist scratches. Features extreme clarity for a pristine, water clear finish. Advanced formulation to minimise bubbles when pouring we recommend to also preheat part a (resin) in a warm water bath if your work area is cold. Astm certified non-hazardous, non toxic and no vocs.Suitable for river tables, flower / keepsake preservation, deep mould castings, woodturning and more. Advanced uv resistance for non-yellowing and protection of your artwork. Perfect for use with our glitters, pigments, epoxy pigment pastes and dyes. Suitable for use as a food safe coating but not as a cutting/food preparation surface. Refer to your instruction leaflet and mix carefully to ensure accurate results.
Mix for at least 3 minutes, scraping the sides and the bottom of the container. By volume a : b 200 : 100 (200 parts resin : 100 parts hardener) (for example 200ml resin : 100ml hardener). By weight a : b 300 : 100 (300 parts resin : 100 parts hardener) (for example 300g resin : 100g hardener). Work time - 60 - 90 minutes at 25c.
Cure time - demould 16 - 24 hours (based on constant room temperature of25cand pour depth of 15cm) cure time of pours below 15cm approx24 - 48 hours. Viscosity - mixed 1000 - 1500 centipoise.Heat resistance - up to 120c. Hardness 25c after 3 days - shore d 95. Maximum pour thickness - 30cm.
Coverage - 1 litre covers approximately 2m2. Shelf life - 12 months in sealed containers.
Please note it is your responsibility to read all health and safety instructions before using this product. Our resins have been formulated with the most up to date epoxy resin chemicals and technology and with safety in mind. Apex resin is safe for home use. Wear a respirator when sanding partially cured resin. Work in a well ventilated room.
Although a respirator is essential when sanding partially cured resin, we also recommend the use of one whenever working with resin for complete protection, especially when additives such as inks, paints, pigments have been added to resin. Avoid skin contact, if contact occurs-wash with soap and water. Avoid contact with clothes and furniture. If resin is poured on unwanted areas wipe immediately with a clean, dry cloth using acetone or similar solvent. Do not eat, drink or smoke while working.In case of eye contamination wash with plenty of water for more than 15 minutes and seek medical advice immediately. If swallowed, seek medical advice immediately if you feel unwell. If alcohol inks have been used, do not use a flame as alcohol is flammable. Keep out of reach of children. Safe for incidental food contact only and not as a food preparation or cutting surface.
Food should not exceed 50c. The fun part let's create. Visit our etsy shop for more great products. We can't wait to see what you create. This item is made of resin and epoxy resin.