Snowwhite epoxy resin, is pre-blended with ultra bright white pigment. Use snowwhite with your favorite type of wood to create a beautiful, contemporary work of art. The high contrast of it's brilliant white color is both opaque and consistent throughout.Snowwhite adheres to any properly prepared wood surface to create an incredibly strong bond and extremely durable finish. Snowwhite can be sanded, shaped, drilled, routered, tapped or machined using woodworking tools. It is a 2 part, stand-alone casting epoxy for casting river tables or projects that require deep layers. It is not made to be mixed with other pigments or epoxies (or flowcast or uvpoxy). More vibrant than adding pigments to a clear epoxy. This only comes in one size. 13.5 liters or 30.4 lbs. Stir each part separately for 30 seconds. (part a and part b). In a clean, dry container; measure 3.7 parts resin to 1 part hardener (by weight), combine and mix thoroughly for 2 -3 minutes. Pour mixture immediately into your mold or form. Failure to properly measure and mix may result in uncured epoxy resin. Please read and follow directions. Additional pigments should not be added, they will not produce the desired effects, as they would be overpowered by snowwhite. Snowwhite does not have the extended pot life of other casting resins. Have your mold ready, mix and pour epoxy immediately, it will cure more rapidly if left in pail. Mold must be sealed thoroughly to avoid blowouts.
Epoxy will flow like water, and can escape through even the smallest cracks. Between 14 - 24 hours, depending on depth, volume and temperature. The previous layer should be firm, but still tacky. Once tack-free it is necessary to sand between layers to ensure proper adhesion. This situation is beyond my control.
We are happy to help. Due to the classification of epoxy resin products, all ecopoxy sales are considered final.This shop, ecopoxy us, is operated and maintained by halfbakedart an authorized us retailer of ecopoxy products manufactured in canada by ecopoxy, inc. This item is made of part a resin and part b hardener, instructions.