EcoPoxy SnowWhite White Casting Epoxy Resin

Snowwhite is a bright white casting epoxy resin by ecopoxy. Made for woodworking and river tables, use snowwhite with your favorite type of wood to create a beautiful, contemporary work of art.

The high contrast of it's brilliant white color is both opaque and consistent throughout. Snowwhite adheres to any properly prepared wood surface to create an incredibly strong bond and extremely durable finish. Snowwhite can be sanded, shaped, drilled, routered, tapped or machined using woodworking tools. More vibrant than adding pigments to a clear epoxy.

This only comes in one size. 13.5 liters or 30.4 lbs. Stir each part separately for 30 seconds. (part a and part b). In a clean, dry container; measure 3.7 parts resin to 1 part hardener (by weight), combine and mix thoroughly for 2 -3 minutes.

Pour mixture immediately into your mold or form. Additional pigments should not be added, they will not produce the desired effects, as they would be overpowered by snowwhite. Snowwhite does not have the pot life of other casting resins. Have your mold ready, mix and pour epoxy immediately, it will cure more rapidly if left in pail. Mold must be sealed thoroughly to avoid blowouts.

Epoxy will flow like water, and can escape through even the smallest cracks. Between 14 - 24 hours, depending on depth, volume and temperature.

The previous layer should be firm, but still tacky. Once tack-free it is necessary to sand between layers to ensure proper adhesion.

Store indoors, away for sunlight. 55 -77 f with tightly sealed lids. Pro tip: add bloxygen for unlimited shelf life. This is completely outside of my control. Due to the nature of epoxy resin materials, all sales are considered final.

This item is made of part a resin and part b hardener, instructions.

---