Resin

EPOXY RES N

EPOXY RES N
EPOXY RES N
EPOXY RES N
EPOXY RES N

EPOXY RES N

-transparent epoxy resin for small volume applications. You can use it to make objects such as necklaces, bracelets, rings, earrings, bookends. It is packaged as a set of 1500 grams in the form of components a and b. There are 1000 grams of a. Component resin and 0.500 grams of b.

Component hardener in the set. In correct use, the resin and hardener are packed just enough to fit together. There is not much product left after use.

It has a transparent appearance. You need to use epoxy pigment to color it. Using any colorant other than epoxy pigment may cause negative results. After curing, the product is completely odorless. In correct use, it will have a smooth surface.

It has a working time of 50-70 minutes. The product has been prepared as two components, resin and hardener, and the component should be mixed with each other. After the first mixture is made, transfer the product to another clean container and mix again for at least 2 minutes. Mixture ratio of resin and hardener should be 2 parts resin and 1 part hardener by weight. A precision scale must be used for the best adjustment of the mixing ratio.

Proportions made with a measuring cup, beaker or injector may be incorrect. After subjecting the prepared mixture to vacuum treatment, pour it into the mold to be applied. Quickly scan the product surface with hot air and/or torch to remove the bubbles formed on the surface after casting.

The poured product can be removed from the mold at the end of the demoulding period. While the product is completing this process, the system should be kept in the range of 20 c-35 c degrees.


EPOXY RES N