Ice Epoxy Ice Board Charcuterie Board Resin 1.5 Gallons (5.67L)

Ice board charcuterie board resin is thin like a deep pour, so it degasses well and sets up in about 24 hours. Perfect for smaller boards and castings where time is of the essence.

Please note: this is an advanced 2:1 epoxy resin. This is a 1.5-gallon kit.

You will receive (1) gallon of resin and. Cures to a crystal-clear appearance and can be tinted with powdered or liquid pigments.

It is a high-performance, highly viscous, epoxy resin with a cure time between 12-36 hours, depending on the volume and thickness poured. Take into consideration the volume of epoxy you pour into a void.

Pouring too much epoxy into a large area can result in shrinking, yellowing, or cracking. Keeping the work area cool by adding a fan can help reduce the risk of the epoxy overheating. For best results, all materials and working conditions should be at a constant temperature. We recommend between 65f and 75f. Epoxy is a temperature-sensitive material.

When cool, it's thicker and will set slower. When warm, it's thinner and will set much faster. Working with material above 75f and depending on volume, the river resin may set too quickly and exotherm (become too hot) which could cause it to yellow, distort, shrink or crack.

The maximum casting thickness can vary depending on a number of factors including ambient temp, material temp, volume, project dimensions, etc. We recommend limiting the volume to under 1 gallon and no more than 1.25 thick.

Once measured in the proper 2:1 ratio, stir until well combined. It should be crystal clear and free of striations before pouring. Whether you're using a paddle mixer or a stick, make sure the sides and bottom are continually scrapped to avoid unmixed resin ruining your project.

---