Resin Epoxy Tray Set , 1000 ml Resin , Epoxy Molds, Resin Kits

1 pack of mix color flowers. Set of 5 silver leaf leaf. Set of 5 gold leaf leaf. 5 pieces of copper leaf leaf.

10 gr powder paint (choice of color). 1 pair of tray handles. It will be sent with 1000ml resin and freezer.

Resin epoxy silicone injection molds are a resin epoxy mold that can protect in a hot environment between 200 and 300 degrees, with a high temperature that allows fast drying in resin epoxy castings that are heat resistant and easily separated, that is, can be removed after the product dries. In addition, our silicone molds are non-one-time resin molds that can be used many times. Resin epoxy molds, which can also be used in many areas, can make differences in many sectors depending on your imagination.

Usage: pour 2 parts of resin into 1 part of hardener into a container and mix slowly until there are no air bubbles. Mix thoroughly for 2-3 minutes, from right to left, from left to right and from bottom to top. During mixing, a homogeneous mixture should be ensured that the mixing bar will touch the bottom and sides of the container. Then the mixture is rested for 5 minutes and poured into the mold and left to dry. After about 6 hours, it can be touched by hand. It hardens completely within 12 hours. It becomes a scratch-proof glass in 48 hours.

---