UV Resistant Marine Grade Epoxy Resin Clear Non-Toxic for Fiberglass Laminating Reinforcing FRP Hulls 3 Gallon Kit

It is a 100% solid epoxy with uv protection additives and eco-friendly confirms non-yellowing protection for a longer duration. Epoxy resin is a 100% solids no voc, primer less, low odour, self-levelling, non-blushing epoxy that provides a sufficient work life, rapid track free time and high adhesion to aggregates and pavements. Each kit includes both pre-proportioned resin (part a) and hardener (part b). It bonds chemically and mechanically to the substrate and can be blend with sand, silica, wood, flower, silica, pebbles and other materials.

It is used for boat building and fiberglass fabricating. Low viscous and low shrinkage distortion. Excellent adhesion to various substrates. Suitable for elevated temperature cure. Improved gloss is achieved in coatings. Fast curing with high mechanical stability. Water white clarity is achieved after cure.

Mixing ratio: 2 part a: 1 part b by volume, 100 a to 58 b by weight. Typical application properties of part-a with hardener part - b.

Components : (a) resin, (b) hardener. Mix ratio, pbv (pbw) : 2/1(100:58). Mixed viscosity, cp 77f : 600-900. Work time, minutes 100grams : 40.

Peak exothermic temperature 100grams : 140f. Not to be construed as specification.

Should be stored in original tightly closed container, in dry and warm conditions. It is advised not to allow the product to freeze.

---